Features:
- Single Handle Chrome Centerset Sink Faucet with Hot and Cold Switch Function
- This faucet is easy to install even without prior experience, and meets or exceeds all applicable industry standards.
- All of our faucets are leak-resistant due to the durability of their ceramic valves and have been tested for quality.
-
The service life of the valves are extraordinary and will withstand more than 600,000 uses, as well as extreme heat. Further tests include high pressure tests at 1.6Mpa.
Specifications:
- Suitable Place: Sink, Bathroom, Lavatory
- Installation Type: Centerset
- Valve Type: Ceramic Valve
- Finish: Chrome
- Faucet Total Height: 12 cm
- Spout Height: 6 cm
- Spout Length: 9 cm
- Shipping Weight: 1.65 kg
Package Contents:
- 1 x Faucet
- 2 x Hose
- 1 x Accessory Set
-
1 x Installation Instruction
Tools You Need for Installation:
- Adjustable wrench
- Tape
- Screwdriver
- Flashlight
General Faucet Installation Instruction:
Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package.
Step 1: Position the Faucet

A: Begin installing your faucet by placing the gasket and faucet in position on the sink.
B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up.
C: From the top of the sink, check the faucet and gasket position.
D: From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.
Step 2: Attach the Water Supply Tubes

A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.
B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.
C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.
D: Tighten the nut with a wrench.
Step 3: Connect the Faucet Lift Rod

A-1: From the top of the sink, insert the lift-rod into the faucet.
A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.
B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.
B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.
B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.
B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.
C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.
Step 4: Flush the Faucet

A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.
A-2: This debris can damage the sealing surfaces inside the faucet and cause leaks.
A-3: Remove aerator and black sealing gasket above it.
A-4: Before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.
B: Open both water supply valves under the sink.
C-1: Allow the water to run for 15 seconds.
C-2: Close the faucet handles (turn off).
D: Make sure any debris is cleaned from the aerator screen.
E: Replace the aerator.
Shipping and Handling:
We provide favorable shipping rates
and combined shipping discount to many countries. Please check here to see our shipping and handling page.
Write a Review and win a 10% discount coupon :
We accept Paypal and major credit cards (processed by Paypal). If you do not have a Paypal account, simply put our item in shopping cart and proceed to checkout. After you reach Paypal web page, you can fill out your contact email account and credit card information and complete the transaction. Please feel free to email us at cectunlocked@gmail.com if you have any questions.
Have something to share about this product? Why not tell us about it and win a 10% discount coupon for your next purchase?
If you have purchased this product, please feel free to tell us what you think about it and share your opinions with fellow buyers. Please focus on the user experience and its pros and cons. All reviews must be original and will be moderated. Every week, we will give out discount coupons to 3 buyers who have submitted well written reviews.
Payment :











